top of page

International Conferences Peer-Reviewed Publications

  1. Prather, E., Shahbaz Badr, A., Simões, B., & De Amicis, R. (2020). A SYSTEMATIC LITERATURE REVIEW ON DYNAMIC COGNITIVE AUGMENTATION THROUGH IMMERSIVE REALITY: CHALLENGES AND PERSPECTIVES, Proc. SPIE 11426, Virtual, Augmented, and Mixed Reality (XR) Technology for Multi-Domain Operations, 114260G (18 May 2020); https://doi.org/10.1117/12.2563816

  2. Riggio M.,P., Shahbaz, B.,A., Prather, A.,E., De Amicis R. (2018). ADVANCING AEC PRACTICE AND DATA LITERACY USING DIGITAL TWINS IN SPATIAL AUGMENTED REALITY ENVIRONMENTS.. In Proceedings of Virtual Concept Workshop, Educational Innovation in Engineering and Sciences, 10-12 December, 2018, Monterrey, México

  3. A. Sandak, J. Sandak, B. Simões, F. Prandi and R. De Amicis. (2016) BIO4EVER PROJECT CONCEPT TO PROMOTE THE BIO-BASED MATERIALS IN MODERN CONSTRUCTION SECTOR-CHALLENGES AND OPPORTUNITIES. COST Action FP1303 workshop. Madrid, Spain, 24-25 February 2016.

  4. Debiasi A., Simões B. and De Amicis R. (2016). SCHEMATIZATION OF CLUTTER REDUCTION TECHNIQUES IN GEOGRAPHIC NODE-LINK DIAGRAMS USING TASK-BASED CRITERIA. In Proceedings of the 11th Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications-Volume 2: IVAPP, (VISIGRAPP 2016) ISBN 978-989-758-175-5, pages 107-114. DOI: 10.5220/0005674801070114

  5. Prandi, F., Magliocchetti, D., Poveda, A., De Amicis, R., Andreolli, M., and Devigili, F. (2016) NEW APPROACH FOR FOREST INVENTORY ESTIMATION AND TIMBER HARVESTING PLANNING IN MOUNTAIN AREAS: THE SLOPE PROJECT, Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLI-B3, pp 775-782, XXIII ISPRS Congress, 12–19 July 2016, Prague, Czech Republic, https://doi.org/10.5194/isprs-archives-XLI-B3-775-2016, 2016.

  6. Simões B., De Amicis R. (2016) EXPERIENCE-DRIVEN FRAMEWORK FOR TECHNOLOGICALLY-ENHANCED ENVIRONMENTS: KEY CHALLENGES AND POTENTIAL SOLUTIONS. In: Pietro G., Gallo L., Howlett R., Jain L. (eds) Intelligent Interactive Multimedia Systems and Services 2016. Smart Innovation, Systems and Technologies, vol 55,. pp 537-546 Springer, Cham, DOI https://doi.org/10.1007/978-3-319-39345-2_47

  7. P. La Scala, B. Simões and R. De Amicis (2016). BRIDGING HERITAGE AND TOURIST UX: A SOCIALLY-DRIVEN PERSPECTIVE. 9th International KES Conference on Intelligent Interactive Multimedia: Systems and Services pp 515-523. Puerto de la Cruz, Tenerife, Spain, 15-17 June 2016.

  8. F. Devigili, D. Lotto and R. De Amicis. (2016) MAPPING AND POCKETING TECHNIQUES FOR LASER MARKING OF 2D SHAPES ON 3D CURVED SURFACES. 9th International KES Conference on Intelligent Interactive Multimedia: Systems and Services, pp 451-458. Puerto de la Cruz, Tenerife, Spain, 15-17 June 2016.

  9. B. Ture Savadkoohi and R. De Amicis. (2016) COMPUTER AIDED PROCESS AS 3D DATA PROVIDER IN FOOTWEAR INDUSTRY. 9th International KES Conference on Intelligent Interactive Multimedia: Systems and Services, pp 471-481. Puerto de la Cruz, Tenerife, Spain, 15-17 June 2016.

  10. Simões B., De Amicis R. (2016) GAMIFICATION AS A KEY ENABLING TECHNOLOGY FOR IMAGE SENSING AND CONTENT TAGGING. In: Pietro G., Gallo L., Howlett R., Jain L. (eds) Intelligent Interactive Multimedia Systems and Services 2016. Smart Innovation, Systems and Technologies, vol 55, pp 503-513. Springer, Cham. DOI https://doi.org/10.1007/978-3-319-39345-2_44

  11. Simões B., Bianchi M., Debiasi A., De Amicis R. (2016) SERIOUS GAMES FOR LARGE-SCALE IMAGE SENSING. The 5th EAI International Conference on Serious Games, Interaction and Simulation. Novedrate, Italy, 16-18 September 2015. In: Vaz de Carvalho C., Escudeiro P., Coelho A. (eds) Serious Games, Interaction, and Simulation. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, vol 161, pp 111-118. Springer, Cham, Print ISBN 978-3-319-29059-1, DOI https://doi.org/10.1007/978-3-319-29060-7_17

  12. Debiasi A., Simões B. and De Amicis R. (2015). 3DARCLENS: INTERACTIVE NETWORK ANALYSIS ON GEOGRAPHIC SURFACES. In Proceedings of the 6th International Conference on Information Visualization Theory and Applications-Volume 1: IVAPP, (VISIGRAPP 2015) ISBN 978-989-758-088-8, pages 291-299. DOI: 10.5220/0005255202910299

  13. B. Simões, P. Aksenov, P. Santos, T. Arentze and R. De Amicis. (2015) C-SPACE: FOSTERING NEW CREATIVE PARADIGMS BASED ON RECORDING AND SHARING CASUAL VIDEOS THROUGH THE INTERNET. Multimedia and Expo Workshops (ICMEW), 2015 IEEE International Conference on Multimedia and Expo, pp. 1-4. Torino, Italy, 29 June-3 July 2015. https://doi.org/10.1109/ICMEW.2015.7169833.

  14. F. Prandi, F. Devigili, M. Soave, U. Di Staso and R. De Amicis. (2015) 3D WEB VISUALIZATION OF HUGE CITYGML MODELS. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Vol. XL-3/W3, pp. 601-605. ISPRS Geospatial Week 2015, La Grande Motte, France, 28 Septebmer-3 October 2015. doi:10.5194/isprsarchives-XL-3-W3-601-2015.

  15. D. Magliocchetti, G. Panizzoni, F. Prandi and R. De Amicis. (2015) GIS TOOLS FOR FOREST PRODUCTION OPTIMIZATION IN MOUNTAINOUS AREAS: THE SLOPE PROJECT. 15th International Multidisciplinary Scientific GeoConference SGEM 2015, Albena, Bulgaria, 16-25 June 2015, www.sgem.org, SGEM2015 Conference Proceedings, ISBN 978-619-7105-34-6 / ISSN 1314-2704, June 18-24, 2015, Book2 Vol. 1, 625-632 pp, DOI: 10.5593/SGEM2015/B21/S8.078.

  16. Magliocchetti, D.; Prandi, F.; Panizzoni, G.; Lotto, D.; Amicis, R. de. (2015) SLOPE: A 3D FOREST VIRTUAL SYSTEM TO SUPPORT HARVESTING OPERATIONS IN MOUNTAIN AREAS. FORMEC 2015. Linz, Austria, 4-8 October 2015. Forest engineering: making a positive contribution. In Proceedings of the 48th Symposium on Forest Mechanization, Linz, Austria, 2015 2015 pp.69-76, Editors : Kanzian, C.; Kühmaier, M.; Erber, G., Publisher : Institute of Forest Engineering, University of Natural Resources and Life Sciences. ISBN : 9783900932299

  17. A. Debiasi, B. Simões and R. De Amicis. (2015) GEOPEELING LENS: DEFORMATION-BASED TECHNIQUE FOR EXPLORATORY DATA ANALYSIS. WSCG'2015-23rd International Conference in Central Europe on Computer Graphics, Visualization and Computer Vision'2015 proceedings are published in Computer Science Research Notes [CSRN] ISSN 2464-4617, pp 53-62, . Pilsen, Czech Republic, 19-25 June 2015.

  18. F. Prandi, G. Panizzoni, D. Magliocchetti, F. Devigili and R. De Amicis. (2015) WEBGL VIRTUAL GLOBE FOR EFFICIENT FOREST PRODUCTION PLANNING IN MOUNTAINOUS AREA. Proceedings of the 20th International Conference on 3D Web Technology, pp. 143-151. ACM, New York, NY, USA, 2015. doi: 10.1145/2775292.2775309.

  19. D. Lotto, B. Simões and R. De Amicis. (2015) C-SPACE: 3D VISUALIZATION AND MODELLING OF DIGITAL MODELS ON MOBILE DEVICES. The eChallenges e-2015 IEEE Conference. Vilnius, Lithuania, 25-27 November 2015. Paul Cunningham and Miriam Cunningham (Eds). IIMC International Information Management Corporation, 2015. ISBN: 978-1-905824-53-3. DOI: 10.1109/eCHALLENGES.2015.7441066

  20. B. Simões, F. Prandi and R. De Amicis (2015) I-SCOPE: A CITYGML FRAMEWORK FOR MOBILE DEVICES. In Proceedings of the Second ACM International Conference on Mobile Software Engineering and Systems, MOBILESoft '15, pp 52-55, Florence, Italy, 16-17 May 2015, IEEE Press Piscataway, NJ, USA ©2015, ISBN: 978-1-4799-1934-5.

  21. Panizzoni G., Magliocchetti D., Prandi F., De Amicis R. (2015) INTERACTIVE VIRTUAL PLANNING TOOLS FOR SUSTAINABLE FOREST PRODUCTION IN MOUNTAIN AREAs. In: Stephanidis C. (eds) HCI International 2015-Communications in Computer and Information Science, vol 528. Springer, Cham, pp 220-225, Print ISBN 978-3-319-21379-8, DOI https://doi.org/10.1007/978-3-319-21380-4_39.

  22. Simões B., Marangon M., De Amicis R. (2015) C-SPACE: A MOBILE FRAMEWORK FOR THE VISUALIZATION OF SPATIAL-TEMPORAL 3D MODELS. In: Damiani E., Howlett R., Jain L., Gallo L., De Pietro G. (eds) Intelligent Interactive Multimedia Systems and Services. Smart Innovation, Systems and Technologies, vol 40. Springer, Cham, pp 35-45, Print ISBN 978-3-319-19829-3, https://doi.org/10.1007/978-3-319-19830-9_4

  23. Simões B., Prandi F., De Amicis R. (2015) CREATIVITY SUPPORT IN PROJECTION-BASED AUGMENTED ENVIRONMENTS. In: De Paolis L., Mongelli A. (eds) Augmented and Virtual Reality. AVR 2015. . Proceedings of Augmented and Virtual Reality: Second International Conference, AVR 2015. Lecce, Italy, 31 August-3 September 2015, pp 168-187Lecture Notes in Computer Science, vol 9254. Springer, Cham. Print ISBN 978-3-319-22887-7, DOI https://doi.org/10.1007/978-3-319-22888-4_13

  24. Debiasi A. and De Amicis R. (2014). Multi-temporal Flow Maps-Looking Back to Look Forward . In Doctoral Consortium-DCVISIGRAPP, (VISIGRAPP 2014) ISBN Not Available, pages 40-46

  25. A. Debiasi, B. Simões and R. De Amicis. (2014) FORCE DIRECTED FLOW MAP LAYOUT. Conference on Information Visualization Theory and Applications (IVAPP), 2014 International, Lisbon, Portugal, Portugal, 5-8 Jan. 2014, Proceedings of IVAPP 2014/VISIGRAPP, ISBN: 978-989-758-005-5, pp. 170 – 177, Digital Object Identifier: 10.5220/0004744601700177

  26. Raffaele De Amicis, Giuseppe Conti, André Stork (2014) FUTURE SHAPE MODELLING SCENARIOS. IN FUTURE VISION AND TRENDS ON SHAPES, GEOMETRY and Algebra Springer Proceedings in Mathematics & Statistics Volume 84, 2014, pp 1-12-10.1007/978-1-4471-6461-6_1.

  27. B. Simões and R. De Amicis. (2014). DIGITAL EARTH IN A USER-CENTRIC PERSPECTIVE, Fifth International Conference on Computing for Geospatial Research and Application (COM.Geo), 2014, IEEE Proceedings of COM.BigData 2014: The 1st International Summit on Big Data Computing. Washington DC (USA), 2014, pp. 47–48. ISBN: 978-1-4799-4321-0 , DOI: 10.1109/COM.Geo.2014.14.

  28. Giovannini L., Pezzi S., di Staso U., Prandi F. and de Amicis R. (2014). LARGE-SCALE ASSESSMENT AND VISUALIZATION OF THE ENERGY PERFORMANCE OF BUILDINGS WITH ECOMAPS-PROJECT SUNSHINE: SMART URBAN SERVICES FOR HIGHER ENERGY EFFICIENCY. In Proceedings of 3rd International Conference on Data Management Technologies and Applications-Volume 1: DATA, ISBN 978-989-758-035-2, pages 170-177. DOI: 10.5220/0004997001700177

  29. A. Debiasi, B. Simões and R. De Amicis. (2014). SUPERVISED FORCE DIRECTED ALGORITHM FOR THE GENERATION OF FLOW MAPS. WSCG 2014 -in co-operation with EUROGRAPHICS Association 22nd International Conference in Central Europe on Computer Graphics, Visualization and Computer Vision, Plzen, Czech Republic, June 2014, PP 193-202, ISBN 978-80-86943-70-1,

  30. A. Debiasi, B. Simões and R. De Amicis. (2014). A NOVEL METHOD FOR THE DEPICTION OF MULTIVARIATE DATA THROUGH FLOW MAPS. IEEE SciVis 2014, pp 245-246., SciVis Posters, Paris, France, November 2014.

  31. F. Prandi, M. Soave, F. Devigili, R. De Amicis, A. Astyakopoulos. (2014). COLLABORATIVELY COLLECTED GEODATA TO SUPPORT ROUTING SERVICE FOR DISABLED PEOPLE. Proceedings of the 11th International Symposium on Location-Based Services (LBS 2014), pp 67-79. Vienna, Austria, November 2014. ISBN 978-1-907075-07-0, DOI 10.13140/2.1.2937.1203

  32. Di Staso U., Magliocchetti D., De Amicis R. (2014) SMART-ISLANDS: ENHANCING USER EXPERIENCE FOR MEDITERRANEAN ISLANDS FOR TOURISM SUPPORT. In: Marcus A. (eds) Design, User Experience, and Usability. User Experience Design for Diverse Interaction Platforms and Environments. DUXU 2014. Lecture Notes in Computer Science, vol 8518, pp 223-233. Springer, Cham, Print ISBN 978-3-319-07625-6, https://doi.org/10.1007/978-3-319-07626-3_21

  33. F. Prandi, M. Andreolli, M. Eccher, U. Di Staso and R. De Amicis. (2014) BARRIERS SURVEY: A TOOL TO SUPPORT DATA COLLECTION FOR INCLUSIVE MOBILITY, Universal Access in Human-Computer Interaction. Aging and Assistive Environments Lecture Notes in Computer Science, Vol. 8515, p. 772-779, 2014.

  34. Devigili F., Magliocchetti D., Conti G., De Amicis R. (2013) EMPOWERING PEOPLE THROUGH MOBILE DEVICES FOR SMARTER PLACES. In: Streitz N., Stephanidis C. (eds) Distributed, Ambient, and Pervasive Interactions. DAPI 2013. Lecture Notes in Computer Science, vol 8028, pp 284-293. Springer, Berlin, Heidelberg, Print ISBN 978-3-642-39350-1, DOI https://doi.org/10.1007/978-3-642-39351-8_31

  35. R. de Amicis, F. Prandi, G. Conti, D. Taglioni, S. Piffer, M. Calderan and A. Debiasi. (2013) LANDSLIDES AND SPATIO-TEMPORAL PROCESSING OF GEOGRAPHICAL INFORMATION. In: Margottini C., Canuti P., Sassa K. (eds) Landslide Science and Practice. Springer, Volume 3: Spatial Analysis and Modelling, Berlin, Heidelberg. pp 429-434, DOI: 10.1007/978-3-642-31310-3_59 Print ISBN 978-3-642-31309-7 Online ISBN 978-3-642-31310-3, © Springer-Verlag Berlin Heidelberg 2013

  36. Marco Soave, Federico De Vigili, Federico Prandi, Raffaele de Amicis. (2013) VISUALIZATION AND ANALYSIS OF CITYGML DATASET WITHIN A CLIENT SEVER INFRASTRUCTURE. Web3D '13 Proceedings of the 18th International Conference on 3D Web Technology, pp 215-215, San Sebastian, Spain — June 20-22, 2013, ISBN: 978-1-4503-2133-4 doi>10.1145/2466533.2466573

  37. Alberto Debiasi, Federico Prandi, Giuseppe Conti, Raffaele de Amicis, Radovan Stojanovic (2013) VISUAL ANALYTICS TOOL FOR URBAN TRAFFIC SIMULATION. SimuTools '13 Proceedings of the 6th International ICST Conference on Simulation Tools and Techniques, Cannes, France — March 05-07, 2013, pp 51-56, ISBN: 978-1-4503-2464-9

  38. Umberto Di Staso, Marco Soave, Raffaele de Amicis, (2013) ENGAGING OUTDOOR USER EXPERIENCE BASED ON HIGH FIDELITY 3D TERRAIN REPRESENTATION ON MOBILE APPS. Published in: IEEE-Fourth International Conference on Computing for Geospatial Research and Application (COM.Geo), San Jose, CA, USA 22-24 July 2013, pp 56-63. DOI: 10.1109/COMGEO.2013.9

  39. R. de Amicis, G. Conti, F. Prandi and A. Debiasi. (2012) USE OF OGC WEB STANDARD FOR A SPATIO-TEMPORAL ENABLED SDI FOR CIVIL PROTECTION. In proceeding of the 17th edition of ACM International Web3D Conference in cooperation with ACM SIGGRAPH. 2012. Los Angeles, California — August 04-05, 2012, Pages 105-111, ISBN: 978-1-4503-1432-9 DOI: 10.1145/2338714.2338732.

  40. Di Staso, Umberto, R. de Amicis, Devigili F., G. Girardi. (2012) PERVASIVE TOURISTIC LOCATION BASED SERVICE MOBILE APP WITH A SOCIAL PERSPECTIVE, POSTER, in proceeding of the 17th edition of ACM International Web3D Conference in cooperation with ACM SIGGRAPH. 2012. Los Angeles, California — August 04-05, 2012, Pages 181-181, ISBN: 978-1-4503-1432-9 doi>10.1145/2338714.2338748.

  41. F. Prandi, A. Debiasi and R. de Amicis. (2012) THE TIME DIMENSION IN EMERGENCY SITUATION in Proceeding of the GeoVisual Analytics, Time to Focus on Time @ GIScience. 2012 . GeoVA(t) – GeoVisual Analytics: Time to Focus on Time

  42. A. Škraba, R. Stojanović, S. Berkowicz, R. De Amicis, G. Conti, D. Elhanani, D. Kofjac. (2012) MODELING OF THE AIR-POLLUTION EMERGENCY SITUATIONS CONTROL AND GEOGRAPHICAL INFORMATION. In Proceedings of the 30th International Conference of the System Dynamics Society, St. Gallen, Switzerland, July 22-26, 2012. ISBN 978-1-935056-10-2

  43. A. Škraba, R. Stojanović, R. De Amicis, S. Berkowicz, G. Conti, D. Elhanani, N. Lekić, M. Dragović, D. Kofjac. (2012). INTEGRATING AIR-POLLUTION DISPERSION SIMULATION MODELS AND GIS FOR URBAN AIR-POLLUTION EMERGENCY MANAGEMENT. Electronic source. V: Felix Breirenecker (ur.), Trocjh, Inge (ur.). 7th Vienna Conference on Mathematical Modeling, February 15-17, 2012, Vienna University of Technology, Austria. MATHMOD Vienna 2012: full paper preprint volume, (Argesim Report, no. S38). Vienna: Argesim, cop. 2012, 4 p.

  44. M. Riggio; F. Prandi; R. De Amicis; M. Piazza, (2012)GEOMETRICAL CHARACTERIZATION OF ROOF TIMBERS IN S.LORENZO CHURCH (TENNO, ITALY) USING CLOSE RANGE PHOTOGRAMMETRY in 5th International Congress Science and Technology for the Safeguard of Cultural Heritage in the Mediterranean Basin, Roma: CNR, 2011, p. 1-7. Atti di: CULTURAL HERITAGE 2011, 5th International Congress Science and Technology for the Safeguard of Cultural Heritage in the Mediterranean Basin, Istanbul, Turkey, 22-25 November, 2011

  45. Riggio, M., Prandi, F., De Amicis, R., Piazza, M.: (2012). USE OF HIGH RESOLUTION DIGITAL IMAGES AND NDT IMAGING TECHNIQUES FOR THE CHARACTERIZATION OF TIMBER STRUCTURAL ELEMENTS. In: Nondestructive testing of materials and structures, Büyüköztürk, O., Tas ̧demir, M.A., Günes ̧, O., Akkaya, Y. (eds.), RILEM Bookseries, vol. 6., pp 365-371, Springer, Dordrecht DOI: 10.1007/978-94-007-0723-8_53; Print ISBN 978-94-007-0722-1; Online ISBN 978-94-007-0723-8; ISSN 2211-0844.

  46. M. Soave and R. de Amicis. (2012) ANALYSIS OF HUMAN GESTURES IN THE 3D SPACE TO CONTROL MULTIMEDIA INTERFACES. In Proceeding in 18th International Conference on Virtual Systems and Multimedia (VSMM), 2012. pp 203 – 210. E-ISBN: 978-1-4673-2563-9 Print ISBN: 978-1-4673-2564-6 INSPEC Accession Number: 13154615.

  47. A. Fiorentino, C. D. Gioia, M. Gaido, G. Conti and D. Magliocchetti.(2012) MOBILE INTEGRATION PLATFORM CONCEPT: THE NAPLES PILOT TEST SITE. In Procedia-Social and Behavioral Sciences, proceeding of the In 4th Transport Research Arena conference (TRA 2012)., Volume 48, 2012, Pages 1855-186, https://doi.org/10.1016/j.sbspro.2012.06.1160.

  48. N. Lathia, L. Capra, D. Magliocchetti, F. Devigili, G. Conti, R. de Amicis, T. Arentze, J. Zhang and D. Cali. (2012) PERSONALIZING MOBILE TRAVEL INFORMATION SERVICES. In Procedia-Social and Behavioral Sciences, proceeding of the 4th Transport Research Arena conference (TRA 2012), Volume 48, 2012, Pages 1195-1204, https://doi.org/10.1016/j.sbspro.2012.06.1095

  49. R. Stojanovic, M. Dragovic, J. Kovacevic, A. Skraba, S. Berkowicz, R. De Amicis, M. Cerovic, (2012) In HARDWARE-SOFTWARE SYSTEM FOR SIMULATION OF HAZARDOUS GAS RELEASES, Proceedings of MECO 2012, pp. 62-65, awarded as the best young scientific paper http://ieeexplore.ieee.org/xpl/articleDetails.jsp?tp=&arnumber=6268925&contentType=Conference+Publications&sortType%3Dasc_p_Sequence%26filter%3DAND(p_IS_Number%3A6268909)%26rowsPerPage%3D50 .

  50. F. Prandi, R. de Amicis, G. Conti, S. Piffer, A. Debiasi and M. Calderan. (2011) BRISEIDE A SPATIO-TEMPORAL FRAMEWORK TO SUPPORT ENVIRONMENTAL ANALYSIS AND EMERGENCY MANAGEMENT. Innovations in Sharing-Environmental Observations and Information, Ispra, 2011, In proceeding of EnviroInfo 2011. Copyright 2011 Shaker Verlag Aachen, ISBN: 978-3-8440-0451-9, pp 909-919.

  51. B. Simões, M. Riggio and R. de Amicis. (2011) APPLICATION OF IMAGE ANALYSIS FOR DETECTION OF WOOD FEATURES FROM NDT IMAGING DATA. In proceeding of the 17th International Nondestructive Testing and Evaluation of Wood Symposium. 2011, ISBN 978-963-9883-81-9 ,ISBN 978-963-9883-82-6 volume 1. ISBN 978-963-9883-83-3 volume 2.

  52. M. Riggio; F. Prandi; R. De Amicis; M. Piazza, (2011) CLOSE RANGE PHOTOGRAMMETRY AND NDT IMAGING TECHNIQUES FOR THE CHARACTERIZATION OF TIMBER STRUCTURAL ELEMENTS in International Conference on Structural Health Assessment of Timber Structures, Lisboa, Portugal: LNEC Laboratorio Nacional de Engenharia Civil, 2011. Atti di: SHATIS'11, Lisbon, June 16-17, 2011

  53. R. Stojanović, A. Škraba, N. Lekic, R. de Amicis, G. Conti, D. Elhanani, S. Berkowicz and M. Bren. (2011) DEVELOPMENT OF SIMULATION SYSTEM FOR AIR-POLLUTION EMERGENCY MANAGEMENT. In Proceedings of The First Global IEEE Conference on Communications, Science and Information Engineering, IEEE CCSIE 2011. Held at Middlesex University, London, UK. Editor: Maaruf Ali and B. Ali Alao, pp 297-301 ISBN: 978-0-9556254-6-6, DOI 10.13140/2.1.1695.3607

  54. D. Magliocchetti, M. Gielow, F. Devigili, G. Conti and R. de Amicis. (2011) A PERSONAL MOBILITY ASSISTANT BASED ON AMBIENT INTELLIGENCE TO PROMOTE SUSTAINABLE TRAVEL CHOICES. Procedia Computer Science, AmbienT Intelligence at the services of inFo-mobility and Critical Transportation networks (ARTIFACT). 2011. Volume 5, 2011, Pages 892-899 , https://doi.org/10.1016/j.procs.2011.07.124

  55. B. Simões, G. Conti and R. de Amicis. (2011) USER-FRIENDLY INTERFACES FOR WEB GIS. Int'l Conf. Internet Computing, ICOMP'11, WORLDCOMP'11-The 2011 World Congress in Computer Science, Computer Engineering, and Applied Computing, July 18-21, 2011, Las Vegas Nevada, USA, CSREA Press, pp 176-182,

  56. R. Stojanović, A. Škraba, N. Lekić, R. D. Amicis, G. Conti, D. Elhanani and S. Berkowitz. (2011) INTEGRATION OF SYSTEM SIMULATION AND GEOGRAPHICAL INFORMATION PROCESSING FOR THE AIR-POLLUTION EMERGENCY SITUATIONS CONTROL AND DECISION MAKING, In Advances in Simulation Based Decision Support, Vol. II, Edited by M. Kljajic and G. Lasker, The International Institute for Advanced Studies in Systems Research and Cybernetics (IIAS), Tecumseh, Canada, 2011, pp. 31-35. , ISBN 978-1-897233-38-2

  57. De Amicis, D. Elhanani, G. Conti, D. Kofjač, (2011). GIS BASED SYSTEM FOR AIR-POLLUTION MANAGEMENT, IN IMPORTANCE OF GEO INITIATIVES AND MONTENEGRIN CAPACITY IN THIS AREA, Editor I. Djurovic, The Montenegrin Academy of Science and Arts, Section of Natural Sciences, Vol. 16, pp. 144-154, ISBN: 978-86-7215-308-8

  58. R. de Amicis, G. Conti, G. Girardi, M. Andreolli and S. Bordin. (2011) LEVERAGING THE TEACHERS’ EXPERIENCE TO DEVELOP EDUCATIONAL MICRO-GAMES FOR FIRST GRADES PUPILS. Proceedings of IS-EUD 2011 Workshop on DEG: Involving End Users and Domain Experts in Design of Educational Games, POSTER, pp 422. 2011 ISSN 0302-9743, DOI 10.1007/978-3-642-21530-8

  59. R. de Amicis, G. Conti, G. Girardi and M. Andreolli. (2011) 3D WEBGIS AND VISUALIZATION ISSUES FOR ARCHITECTURES AND LARGE SITES . 3D-Arch-Trento Italy. 2011. International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Volume XXXVIII-5/W16, 2011, pp 129-134, ISPRS Trento 2011 Workshop, 2-4 March 2011, Trento, Italy

  60. R. de Amicis, F. Prandi, G. Conti and A. Debiasi. (2011) SPATIO-TEMPORAL SERVICES FOR SPATIAL DATA AND METADATA IN CIVIL PROTECTION CONTEXT. In Proceeding of STDM 2011 The International Symposium on Spatial-Temporal Analysis and Data Mining-London UK. 18th – 19th July 2011, pp 40-42.

  61. G. Conti, P. Watson, N. Shape, R. de Amicis and F. Prandi. (2011) ENABLING THE INTERNET OF PLACES: A VIRTUAL STRUCTURE OF SPACE-TIME-TASKS TO FIND AND USE INTERNET RESOURCES. COM GEO 2011, Article No.: 9, Washington, DC, USA — May 23-25, 2011 , ACM New York, NY, USA ©2011, ISBN: 978-1-4503-0681-2 doi>10.1145/1999320.1999329

  62. R. de Amicis, G. Conti, F. Prandi, S. Mauro, C. Alessandro and B. Laura. (2011) TIME DIMENSION IN E-GOVERNMENT GI DRIVEN SERVICES. The 14th AGILE International Conference on Geographic Information Science-SESSION 10-Spatial-Temporal Modeling and Analysis II , pp134-137, Utrecht, The Netherlands. 2011, ISBN: 978-90-816960-1-2

  63. R. de Amicis, G. Conti, D. Taglioni, D. Magliocchetti and G. Girardi. (2011) DEVELOPMENT OF AN OPEN FRAMEWORK TO PROVIDE INTELLIGENT MULTI-MODAL MOBILITY SERVICES. 2011. Proceedings REAL CORP 2011 Tagungsband 18-20 May 2011, pp 189-198, Essen. Editors: Manfred SCHRENK, Vasily V. POPOVICH, Peter ZEILE, ISBN: 978-3-9503110-0-6 (CD-ROM); ISBN: 978-3-9503110-1-3 (Print)

  64. G. Agugiaro, F. Remondino, G. Girardi, J. von Schwerin, H. Richards-Rissetto and R. de Amicis. (2011) A WEB-BASED INTERACTIVE TOOL FOR MULTI-RESOLUTION. 3D-Arch Workshop 2011: Virtual Reconstruction and Visualization of Complex Architectures, 2-5 March 2011, Trento, Italy. In International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Volume XXXVIII-5/W16, 2011, pp 23-30, https://doi.org/10.5194/isprsarchives-XXXVIII-5-W16-23-2011

  65. S. Piffer, G. Conti, F. Prandi, M. Calderan, R. de Amicis and D. Taglioni. (2010) INTRODUCING HIGH-INNOVATIVE GEOSPATIAL ENTERPRISE SOFTWARE SOLUTION TO MANAGE CRITICAL INFRASTRUCTURES: TRANSFERRING KNOWLEDGE FROM A RESEARCH CENTER TO A MOTORWAY OPERATOR. In proceedings of the Innovation KT 2010

  66. R. Fabio, R. Alessandro, A. Giorgio, R. de Amicis, D. Magliocchetti, G. Girardi and B. Giorgio. (2010) GEOMATICS AND GEOINFORMATICS FOR THE DIGITAL 3D DOCUMENTATION, FRUITION AND VALORIZATION OF CULTURAL HERITAGE. In proceeding of Euromed 2010 workshop on Museum Futures: Emerging Technological and Social Paradigms, November 8th-13th, 2010, Cyprus

  67. R. de Amicis, G. Conti and F. Prandi. (2010) SPATIO-TEMPORAL DATA MANAGEMENT AND PROCESSING IN THE CONTEXT OF CIVIL PROTECTION SCENARIOS. Proceedings of GSDI (Global Spatial Data Infrastructure Association) 2010, 19-22 October 2010, Singapore. 2010. pp. CD-ROM

  68. M. P. Riggio, M. Santini, R. de Amicis and M. L. Torrente. (2010) USE OF X-RAY TOMOGRAPHY AND CAD TECHNIQUES FOR MORPHOLOGY-BASED WOOD ELEMENTS MODELS. In Proceeding of the IDMME Virtual Concept Conference. October 20th-22th, 2010, Bordeaux, France, Research in Interactive Design, Publisher Springer-Verlag France, pp P160-1-4, ISBN (Online) 978-2-8178-0169-8, ISBN(Print) 978-8178-0168-1

  69. M. Calderan, G. Conti and R. de Amicis. (2010) A VORONOI BASED TESSELLATOR FOR DIGITAL ELEVATION MODELS. In Proceeding of the IDMME Virtual Concept Conference. October 20th-22th, Bordeaux, France, 2010 Research in Interactive Design, Publisher Springer-Verlag France, pp P137-1-6, ISBN (Online) 978-2-8178-0169-8, ISBN(Print) 978-8178-0168-1

  70. D. Magliocchetti, G. Conti and R. de Amicis. (2010) I-MOVE: A FRAMEWORK FOR INTEROPERABLE MOBILE 3D GEOBROWSERS. In Proceeding of the IDMME Virtual Concept Conference. October 20th-22th, Bordeaux, France, 2010 Research in Interactive Design, Publisher, Springer-Verlag France, pp P136-1-6 ISBN (Online) 978-2-8178-0169-8, ISBN(Print) 978-8178-0168-1

  71. B. Simões, S. Piffer, A. Cariero, G. Conti and R. de Amicis. (2010) INTERACTIVE ACCESS AND PROCESSING OF MULTISPECTRAL IMAGERY: THE USER IN THE LOOP. In Personal Satellite Services, pp 381-395 K. Sithamparanathan, M. Marchese, M. Ruggieri and I. Bisio eds. Publisher Springer Berlin Heidelberg. 2010. DOI: 10.1007/978-3-642-13618-4_29; Print ISBN 978-3-642-13617-7; Online ISBN 978-3-642-13618-4; Series ISSN 1867-8211.

  72. G. Pellitteri, R. Lattuca, G. Conti and R. de Amicis. (2010) A GENERATIVE DESIGN SYSTEM TO INTERACTIVELY EXPLORE DIFFERENT URBAN SCENARIOS. FUTURE CITIES 28th eCAADe Conference Proceedings, 15-18 September 2010, Zurich, Switzerland. 2010. pp. 851-859. Publisher: vdf Hochschulverlag AG, an der ETH Zurich ISBN-10: 3728132799 ISBN-13: 978-3728132796

  73. G. Conti, F. Prandi and R. de Amicis. (2010) BRISEIDE-SIMULATION AND DECISION SUPPORT FOR CIVIL PROTECTION. Advances in Simulation-Based Decision Support proceedings of Design Decision Support, Proceedings of 22nd International Conference on Systems Research, Informatics and Cybernetic, August 2-6, 2010 Baden-Baden, Germany. M. Kljajic and G. E. Lasker eds. 2010. pp. 51-55, IIAS-270-2010, ISBN 9781897233900

  74. R. de Amicis, G. Conti and F. Prandi. (2010)  AN INTEGRATED FRAMEWORK FOR SPATIO-TEMPORAL DATA MANAGEMENT: THE PROJECT BRISEIDE – BRIDGING SERVICES INFORMATION AND DATA FOR EUROPE. 1st International Workshop on Pervasive Web Mapping Geoprocessing and Services, 26-27 Aug 2010, Como, Italy. In proceedings of WebMGS 2010, Volume: ISPRS Archives – Volume XXXVIII-4/W13, 2010, ISSN Number: 1682-1777

  75. Bita Ture Savadkoohi and Raffaele de Amicis, (2010) POST-PROCESSING OF 3D SCANNING DATA FOR CUSTOM FOOTWEAR MANUFACTURE. 18th International Conference on Computer Graphics, Visualization and Computer Vision , in co-operation with EUROGRAPHICS Plizen, Czech Republic, February 1-4, 2010. In WSCG 2010-POSTER Proceedings, pp 13-18 , ISBN 978-80-86943-86-2

  76. Raffaele De Amicis, Gabrio Girardi, Michele Andreolli, Giuseppe Conti. (2009) GAME BASED TECHNOLOGY TO ENHANCE THE LEARNING OF HISTORY AND CULTURAL HERITAGE. In proceedings of ACE 2009 International Conference on Advances in Computer Entertainment Technology, Athens, Greece. October 29-31, 2009. In Cooperations SIGCHI ACM Pages: 451-451, ISBN 978-1-60558-864-3, doi>10.1145/1690388.1690499

  77. Raffaele de Amicis, Giuseppe Conti, Bruno Simões, Stefano Piffer, (2009) USER-FRIENDLY INTERACTIVE WPS PROGRAMMING, international conference for Free and Open Source Software for Geospatial FOSS4G, 20-23 October, 2009, Sydney, Australia. http://2009.foss4g.org/researchpapers/

  78. Raffaele De Amicis, Giuseppe Conti, Bruno Simões, Stefano Piffer. (2009) AN INNOVATIVE PLATFORM FOR TERRITORIAL CONTROL AND MONITORING-THE EXPERIENCE OF A PROJECT AT THE LOCAL ADMINISTRATION LEVEL. Published in: eChallenges e-2009 Conference, 21-23 October 2009, Istanbul, Turkey. Proceedings, Paul Cunningham and Miriam Cunningham (Eds), IIMC International Information Management Corporation Ltd 2009, ISBN 978-1-905824-13-7, ISBN: 978-1-905824-13-7

  79. Giuseppe Conti, Raffaele De Amicis, (2009) I-TOUR-INTELLIGENT TRANSPORT SYSTEM FOR OPTIMIZED URBAN TRIPS. Published in: eChallenges e-2009 Conference, 21-23 October 2009, Istanbul, Turkey. Proceedings, Paul Cunningham and Miriam Cunningham (Eds), IIMC International Information Management Corporation Ltd 2009, ISBN 978-1-905824-13-7, ISBN: 978-1-905824-13-7

  80. Giuseppe Conti Stefano Disperati, Raffaele De Amicis (2009). THE USE OF GEOBROWSER, VIRTUAL WORLDS AND VISUAL ANALYTICS IN THE CONTEXT OF DEVELOPING COUNTRIES' ENVIRONMENTAL SECURITY. In Proceedings of 6th Digital Earth Conference, Beijing, 2009.

  81. Bita Ture savadkoohi and Raffaele de Amicis, (2009)FOOT WEAR FROM THREE- DIMENSIONAL SCANS: AN ACCURATE REVERSE ENGINEERING SYSTEM AND COMPARISON In Conference on Geometry Theory and application, Plizen, Czech Republic, Jun 29-July 2,2009

  82. Pellitteri, G., Lattuca, R., Concialdi, S., Conti, G., De Amicis, R., (2009) ARCHITECTURAL SHAPE GENERATING, THROUGH ENVIRONMENTAL FORCES. In proceedings of CAAD Futures Joining Languages, Cultures and Visions/Joindre Langages, Cultures et Visions-CAADFutures 2009. 2009, Montreal. Publisher: Les Presses de l'Université de Montréal. ISBN 978-2-7606-2177-0

  83. Bita Ture Savadkoohi and Raffaele de Amicis, (2009) SIMILARITY ESTIMATION FOR COMPUTERIZE FOOTWEAR FIT. In 19th International Conference on Computer Graphic and Vision, Moscow, Russia, October 5-9, 2009, pp 27-33.

  84. Simoes B., Conti G., De Amicis R., Piffer S., (2009). ENTERPRISE-LEVEL ARCHITECTURE FOR INTERACTIVE WEB-BASED 3D VISUALIZATION OF GEO-REFERENCED REPOSITORIES. In proceedings of Web3D, Darmstadt 2009. publisher The Eurographics Association, pp 147-154, ISBN 978-1-60558-432-4, DOI 10.1145/1559764.1559787

  85. Ture Savadkoohi B., De Amicis R., Conti G. (2009). AN OVERVIEW OF TECHNOLOGY FOR 3D ACQUISITION AND REGISTRATION. Conference: Proceedings of the 2009 International Conference on Computer Graphics & Virtual Reality, CGVR 2009, July 13-16, 2009, Las Vegas, Nevada, USA , pp 104-109.

  86. Savadkoohi B.T., De Amicis R. (2009) A CAD SYSTEM FOR EVALUATING FOOTWEAR FIT. In: Ślęzak D., Grosky W.I., Pissinou N., Shih T.K., Kim T., Kang BH. (eds) Multimedia, Computer Graphics and Broadcasting. Communications in Computer and Information Science, vol 60, pp 1-7. Springer, Berlin, Heidelberg. Print ISBN 978-3-642-10511-1 https://doi.org/10.1007/978-3-642-10512-8_1

  87. Encarnação J. L., De Amicis R., Rix J., Conti G., (2008). BEYOND FOSS 3D GIS TECHNOLOGIES: A CHANCE FOR DEVELOPING COUNTRIES. In proceedings of FOSS4G 2008 Open Source GIS: an option for Developing Nations. Cape Town, South Africa, 29th Sept- 3rd Oct. 2008, pp 333-340, ISBN 978-0620-42117-1.

  88. Conti, G., De Amicis R. Piffer S. (2008). VIRTUAL PRODUCT CONFIGURATOR FOR A MAJOR FOOD PRODUCT INDUSTRIAL PRODUCER. In Proceedings of Virtual Concept 2008, 8-10 October 2008, Beijing, China.

  89. Conti, G., De Amicis R. (2008). SERVICE-BASED INFRASTRUCTURES FOR THE NEW GENERATION OF INTERACTIVE TERRITORIAL MANAGEMENT SYSTEMS. In Lasker G. E., Kljajic, M., Mora, M., Gelman O., Paradice D. (Eds.) proceedings of the Symposium on Engineering and Management of IT-Based Organizational Systems, 2008

  90. Van Leuken R.H., Symonova O., Veltkamp R.C., de Amicis R. (2008) COMPLEX FIEDLER VECTORS FOR SHAPE RETRIEVAL. In: da Vitoria Lobo N. et al. (eds) Structural, Syntactic, and Statistical Pattern Recognition. SSPR /SPR 2008. Lecture Notes in Computer Science, vol 5342. Springer, Berlin, Heidelberg, pp 167-176. DOI: 10.1007/978-3-540-89689-0_21 Print ISBN 978-3-540-89688-3 Online ISBN978-3-540-89689-0 Series ISSN0302-9743.

  91. Pellitteri G., Concialdi S., Lattuca R., Conti G., De Amicis R. (2008). DIGITAL ARCHITECTURES GENERATED USING FORCES IN URBAN ENVIRONMENT. In Architecture in Computro, 26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2, Antwerpen (Belgium) 17-20 September 2008, pp. 951-958.

  92. De Amicis, R., Girardi, G., Conti, G., (2008). THE EVOLUTION OF THE CITY OF TRENTO ACROSS CENTURIES . In proceedings of Digital Interactive Media in Entertainment & Arts (Dimea 2008) conference, Athens Information Technology, Athens. ACM Press. Pages: 108-112 doi>10.1145/1413634.1413658

  93. Conti G., Andreolli M., Piffer S. and de Amicis R. (2008). A 3D WEB BASED GEOGRAPHICAL INFORMATION SYSTEM FOR REGIONAL PLANNING. In Proceedings of the Fourth International Conference on Web Information Systems and Technologies-Volume 2: WEBIST, ISBN 978-989-8111-    27-2, pages 155-160. DOI: 10.5220/0001520701550160

  94. Conti G. and De Amicis R. (2008). NEW GENERATION 3D WEB-BASED GEOGRAPHICAL INFORMATION SYSTEMS-The Importance of Integrated Infrastructures for Territory Management.In Proceedings of the Fourth International Conference on Web Information Systems and Technologies-Volume 2: WEBIST, ISBN 978-989-8111-27-2, pages 347-350. DOI: 10.5220/0001531903470350

  95. Witzel M., Conti G., De Amicis R. (2008) USER-CENTERED MULTIMODAL INTERACTION GRAPH FOR DESIGN REVIEWS. IEEE Virtual Reality 2008 : Reno, Nevada, USA, March 8-12, 2008 : proceedings /​ edited by Ming Lin, Anthony Steed, Carolina Cruz-Neira ; sponsored by IEEE Computer Society Visualization and Graphics Technical Committee, pp. 299-300, ISBN 9781424419722, DOI: 10.1109/VR.2008.4480810 · Source: IEEE Xplore

  96. Conti G., Witzel M., De Amicis R., (2008) A USER-DRIVEN EXPERIENCE IN THE DESIGN OF A MULTI-MODAL INTERFACE FOR INDUSTRIAL DESIGN REVIEW . In Human Factors in Telecommunication, 17-20 March 2008, Kuala Lumpur Malaysia, . pp. 351-358

  97. Santos,P., Stork, A., Gierlinger, T., Pagani,A., Araujo, B., Jota, R., Bruno, L., Jorge, J., Madeiras Pereira, J., Witzel, M., Conti, G., De Amicis, R., Barandarian, I., Paloc, C., Machui, O., Bodammer, G., J., Jiménez, M., McIntyre, D., (2007) IMPROVE: COLLABORATIVE DESIGN REVIEW IN MOBILE MIXED REALITY. Second International Conference, ICVR 2007, Held as part of HCI International 2007, Beijing, China, July 22-27, 2007. In: Shumaker R. (eds) Virtual Reality. ICVR 2007. Lecture Notes in Computer Science, pp 543-553, vol 4563. Springer, Berlin, Heidelberg, DOI https://doi.org/10.1007/978-3-540-73335-5_59

  98. Santos,P., Stork, A., Gierlinger, T., Pagani,A., Araujo, B., Jota, R., Bruno, L., Jorge, J., Madeiras Pereira, J., Witzel, M., Conti, G., De Amicis, R., Barandarian, I., Paloc, C., Machui, O., Bodammer, G., J., Jiménez, M., McIntyre, D., (2007). IMPROVE: ADVANCED DISPLAYS AND INTERACTION TECHNIQUES FOR COLLABORATIVE DESIGN REVIEW. Second International Conference, ICVR 2007, Held as part of HCI International 2007, Beijing, China, July 22-27, 2007. In: Shumaker R. (eds) Virtual Reality. ICVR 2007. Lecture Notes in Computer Science, pp 376-385, vol 4563. Springer, Berlin, Heidelberg ISBN 978-3-540-73334-8, DOI https://doi.org/10.1007/978-3-540-73335-5_41

  99. Conti, G., De Amicis, R., Ucelli, G., (2007), Knowledge-Based Design of Interaction for Virtual Environments in Industrial Design, in Knowledge-Based Interaction Design, Sommerer and Jain (Eds.) Publisher: Springer- Verlag, Germany.

  100. Santos,P., Stork, A., Gierlinger, T., Pagani,A., Araujo, B., Jota, R., Bruno, L., Jorge, J., Madeiras Pereira, J., Witzel, M., Conti, G., De Amicis, R., Barandarian, I., Paloc, C., Machui, O., Bodammer, G., J., Jiménez, M., McIntyre, D., (2007) IMPROVE: DESIGNING EFFECTIVE INTERACTION FOR VIRTUAL AND MIXED REALITY ENVIRONMENTS. International Conference on Human-Computer Interaction, HCI 2007 , 9-14 July  Vancouver, BC, Canada. In: Jacko J.A. (eds) Human-Computer Interaction. Interaction Platforms and Techniques. HCI 2007. Lecture Notes in Computer Science, pp 689-699, vol 4551. Springer, Berlin, Heidelberg. DOI https://doi.org/10.1007/978-3-540-73107-8_77, Print ISBN 978-3-540-73106-1

  101. P. A. Bertacchini, R. Beusing, A. Bursche, G. Conti, R. De Amicis, M. Etz, D. Holweg, M. T. Linaza, T. Maver, A. Posluschny, D. Pritchard, S. Sievers, A. Tavernise. (2007) NETCONNECT-CONNECTING EUROPEAN CULTURE THROUGH NEW TECHNOLOGY. IN PROCEEDINGS OF EVA LONDON, 11-33 July 2007, the London College of Communications, London (UK). Bowen, J.P. ; University of the Arts London, College of Communication: EVA London 2007. Conference Proceedings : 9-13 July 2007, London, ISBN: 0-9543146-8-9, pp.36.1-36.11

  102. Symonova O., De Amicis R. (2007) SHAPE SEGMENTATION FOR SHAPE DESCRIPTION. IADIS International Conference on Computer Graphics and Visualization (Lisbon, Portugal, July, 2007)., pp 112-116. 978-972-8924-39-3

  103. Symonova, O., Dao, M.S, Ucelli, G., and De Amicis, R. (2006). ONTOLOGY BASED SHAPE ANNOTATION AND RETRIEVAL. 2nd International Workshop on Contexts and Ontologies: Theory, Practice and Applications (C&O’06), Riva del Garda, Italy, August 28, 2006.

  104. De Amicis, R., Di Gironimo, G., & Marzano, A. (2006). DESIGN OF A VIRTUAL REALITY ARCHITECTURE FOR ROBOTIC WORK CELLS SIMULATIONS. In D. Coutellier, & X. Fischer (Eds.), Research in Interactive Design: Proceedings of Virtual Concept (Vol. 2, pp. 1-6). Paris: Springer-Verlag France. DOI: 10.1007/978-2-287-48370-7

  105. Brunetti, G. , Ucelli, G.; Santos, P. ; Amicis, R. de ; Stork, A. (2006) HANDLING SHAPE SEMANTICS IN VIRTUAL STYLING,                Fischer, X. ; Ecole Supérieure des Technologies Industrielles Avancées -ESTIA-: Research in Interactive Design : Proceedings of Virtual Concept 2005, Paris: Springer, 2006, ISBN: 2-287-28772-8, ISBN: 978-2-287-28772-5, 10 pp.

  106. L Han, R De Amicis, G Conti (2007) SPLINE-BASED SHAPE MODELING BY 3D SKETCHING. Eurographics Italian Chapter Conference, , Pages 7-13, ISBN 978-3905673-62-3

  107. Symonova O., De Amicis R., (2007) SHAPE ANALYSIS FOR AUGMENTED TOPOLOGICAL SHAPE DESCRIPTOR. EG07 Eurographics 2007, Prague, Czech Republic, September, 2007, pp 9-12

  108. M. Witzel, M. Andreolli, G. Conti, R. De Amicis, B. De Araújo, R. Jota, and J. Jorge.(2007) COLLABORATIVE VISUALIZATION OF SENSOR DATA THROUGH A SUBSCRIPTION BASED ARCHITECTURE. In proceedings of 5th Eurographics Italian Chapter, 14-17 February 2007 Trento, Italy, Eurographics Association, Switzerland, pp. 173-180 . ISBN 978-3905673-62-3

  109. Han L., De Amicis R. and Conti G. (2006). ADAPTIVE CONSTRAINT AND 3D SKETCH-BASED DEFORMATION FOR INTERACTIVE FREE FORM SURFACE STYLING.In Proceedings of the First International Conference on Computer Graphics Theory and Applications-Volume 1: GRAPP, ISBN 972-8865-39-2, pages 392-399. DOI: 10.5220/0001352803920399

  110. Conti G., Piffer S., Girardi G., De Amicis R., Ucelli G. (2006) DENTROTRENTO – A VIRTUAL WALK ACROSS HISTORY. Working Conference on Advanced Visual Interfaces AVI 2006, A. Celentano and P. Mussio (Ed.)- In cooperation with ACM-SIGCHI, ACM-SIGMM, SIGCHI Italy-May 23-26, 2006, Gallipoli (Lecce), Italy. pp. 318-321 ISBN: 1-59593-353-0

  111. Ucelli G., Conti G., Piffer S., Girardi G., De Amicis R. (2006) VIRTUAL WALK IN A LOST BUILT ENVIRONMENT USING IMMERSIVE VIRTUAL REALITY. Communicating Space(s), 24th eCAADe 2006, Conference Proceedings / ISBN 0-9541183-5-9, Volos (Greece) 6-9 September 2006, pp. 758-762 http://papers.cumincad.org/cgi-bin/works/Show?2006_758

  112. Symonova, O., Dao, M.S, De Amicis, R., and Ucelli, G. (2006). TOPOLOGICAL DESCRIPTOR FOR CAD MODELS WITH INNER CATIVIES. 4th EuroGraphics Italian Chapter, Università di Catania, Italy, Febuary 22-24, 2006, pp 61-67. ISBN 3-905673-58-

  113. Han L., De Amicis R., Conti G. (2006). INTERACTIVE SPLINE DRIVEN DEFORMATION FOR FREEFORM SURFACE STYLING. In Proceedings of the 2006 ACM symposium on Solid and physical modeling. 06-08 June, 2006, Cardiff, Wales, United Kingdom. ACM Press, pp. 139 147. ISBN:1595933581, 10.1145/1128888.1128908

  114. Piffer S.; Conti G., Ucelli G., De Amicis R. (2006). DENTROTRENTO: AN EXAMPLE OF APPLICATION OF COMPUTER GRAPHICS TO THE EVOLUTION OF THE ARCHEOLOGICAL SITE OF TRIDENTUM. In proceedings of the Fourth Eurographics (European Association of Computer Graphics) – Italian Chapter conference, Catania, February 22-24, 2006, pp166-169.  doi    = {10.2312/LocalChapterEvents/ItalChap/ItalianChapConf2006/165-169},

  115. Witzel M., Conti G., De Amicis R. (2006). A MESSAGE-BASED ANNOTATION SYSTEM FOR COLLABORATIVE DESIGN REVIEW. In proceedings of the Fourth Eurographics (European Association of Computer Graphics) – Italian Chapter conference, Catania, February 22-24, 2006. pp 279-283

  116. Dao, M.S. and De Amicis, R. (2006). A NEW METHOD FOR BOUNDARY-BASED SHAPE MATCHING AND RETRIEVAL. IEEE International Conference on Image Processing (ICIP’06), Atlanta, GA, USA, October 8-11, 2006, 1485-1488, ISBN 1-4244-0480-0

  117. Dao, M.S., De Amicis, R., (2006). A FUSION METHOD OF GEOMETRIC AND TOPOLOGICAL MODALITIES FOR BOUNDARY-BASED SHAPE MATCHING AND RETRIEVAL. IEEE International Workshop on Multimedia Signal Processing (MMSP’06), Victoria, BC, Canada, October 3-6, 2006. , 217-220, 10.1109/MMSP.2006.285300

  118. Brunetti, G., Ucelli, G., Sevilmis, N., De Amicis, R., Stork, A. (2005). INTEGRATING VIRTUAL STYLING WITH AN ONTOLOGY-BASED CONTENT MANAGEMENT SYSTEM FOR INDUSTRIAL DESIGN. Virtual Concept 2005, Biarritz, France, 8-10 November 2005.

  119. Dao, M., De Amicis, R., De Natale, F., (2005). CSSIR CAR BLUEPRINT IMAGES RETRIEVAL USING SKETCH AND SPATIAL INFORMATION. TCN CAE 2005 – International Conference on CAE and computational Technologies for Industry, 5-8 ottobre, Convento di San Domenico-Lecce-Italy. http://tcncae05.consorziotcn.it/papers/172.html

  120. Ucelli, G., Conti, G., De Amicis, R. (2005). THE BOOK OF COLOURS: AN AUGMENTED REALITY-BASED LEARNING TOOL FOR CHILDREN. CAL'05 Virtual Learning. University of Bristol, UK, 4-6 April 2005.

  121. Conti, G., Bincoletto, P., De Amicis, R. (2005). A MOBILE INFORMATION SYSTEM FOR EXHIBITIONS AND MUSEUMS. ICMTL 2005 International Conference Methods and Technologies for Learning, Palermo (Italy) 9-11/3/2005

  122. Ucelli, G., De Amicis, R., Conti, G., Brunetti, G., Stork, A. (2005). SHAPE SEMANTICS AND CONTENT MANAGEMENT FOR INDUSTRIAL DESIGN AND VIRTUAL STYLING. SVE 2005 Workshop towards Semantic Virtual Environments, Séminaire du 3ème Cycle Romand d'Informatique organized by MIRAlab and CUSO with the support of the AIM@Shape, European Network of Excellence Villars, Switzerland, 16-18 March 2005, pp. 127-137.

  123. Conti, G., Ucelli, G., De Amicis, R. (2005). AUTOMATIC EXTRACTION OF SEMANTIC INFORMATION FOR A CONTEXT SENSITIVE MULTIMODAL FRAMEWORK FOR VR. 2005 INTERNATIONAL CONFERENCE ON CYBERWORLDS. 23-25 November 2005, Nanyang Executive Centre, Singapore. DOI: 10.1109/CW.2005.25

  124. Ucelli G., Conti G., De Amicis R., Servidio R. (2005) LEARNING USING AUGMENTED REALITY TECHNOLOGY: MULTIPLE MEANS OF INTERACTION FOR TEACHING CHILDREN THE THEORY OF COLOURS. In: Maybury M., Stock O., Wahlster W. (eds) Intelligent Technologies for Interactive Entertainment. INTETAIN 2005, pp 193-202. Lecture Notes in Computer Science, vol 3814. Springer, Berlin, Heidelberg. LNAI 3814, Springer, pp 193-202 DOI: 10.1007/11590323_20 Print ISBN978-3-540-30509-5 Online ISBN978-3-540-31651-0 Series ISSN0302-9743.

  125. De Amicis, R., Ingrassia, T., Mancuso A. (2005) A TOOL FOR THE INTERACTIVE MESH REFINEMENT IN VIRTUAL ENVIRONMENTS. Virtual Concept 2005, Biarritz, France, 8-10 November, pp 8, 2005, ISBN: 978-2-287-28772-5, DOI 10.1007/2-287-28773-6

  126. De Amicis , R., Cappello, F., Ingrassia, T., Mancuso, A., Nigrelli, V. (2005). FINITE ELEMENT RE-ANALYSIS IN VIRTUAL REALITY ENVIRONMENTS. Virtual Concept 2005, Biarritz, France, 8-10 November 2005., pp 7, ISBN: 978-2-287-28772-5, DOI 10.1007/2-287-28773-6

  127. Han L., Conti G., De Amicis R. (2005) RESPONSIVE INTERACTION BASED ON SKETCH IN CONCEPT STYLING. In: Costabile M.F., Paternò F. (eds) Human-Computer Interaction-INTERACT 2005. INTERACT 2005. Lecture Notes in Computer Science, pp 94-105 , vol 3585. Springer, Berlin, Heidelberg. DOI: 10.1007/11555261_11 Print ISBN978-3-540-28943-2 Online ISBN978-3-540-31722-7 Series Volume 3585 Series ISSN0302-9743.

  128. Conti, G., Bincoletto, P., De Amicis, R. (2005). A MOBILE INFORMATION SYSTEM FOR EXHIBITIONS AND MUSEUMS. METHODS AND TECHNOLOGIES FOR LEARNING, G. Chiazzese, M. Allegra, A. Chifari, S. Ottaviano (Eds.), Volume 34 of the WIT Transactions on Information Communication Technologies, WIT Press. 2005, pp.355-360 ISBN 1-84564-155-8.

  129. Ucelli, G., Conti, G., De Amicis, R. (2005). SHAPE KNOWLEDGE EMBEDDED IN A COLLABORATIVE VIRTUAL DESIGN ENVIRONMENT FOR ARCHITECTURAL DESIGN. eCAADe 2005 Education and research in Computer Aided Architectural Design in Europe, Lisbon, Portugal, 21-24 September 2005. Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 758-762 http://papers.cumincad.org/cgi-bin/works/Show?2006_758

  130. Han, L., De Amicis, R., Conti, G. (2005). FREEHAND 3D CURVE RECOGNITION AND OVERSKETCHING. Eurographics UK Chapter (EGUK) Theory and Practice of Computer Graphics 2005, University of Kent, Canterbury, UK, 15-17 June 2005, pp 187-193 ISBN 3-905673-56-8, http://dx.doi.org/10.2312/LocalChapterEvents/TPCG/TPCGUK05/187-193

  131. Hernádvőlgyi I. T., Ucelli G., Symonova O., Delpero L., De Amicis R.. (2004) SHAPE SEMANTICS FROM SHAPE CONTEXT. Workshop on Modelling and Retrieval of Context in KI 2004, 20-21 September 2004, University of Ulm, Germany, ISSN 1613-0073. http://ceur-ws.org/Vol-114/

  132. Hernádvőlgyi I. T., Ucelli G., Conti G., Faisstnauer C. De Amicis R. (2004). INTEGRATED MODELING OF SHAPE SEMANTICS FOR INDUSTRIAL DESIGN. Intelligence Systems Design in Applications associated with IEEE International Conference on Computational Cybernetics ICCC 2004, 26th-28th August 2004, Budapest, Hungary.

  133. Ucelli G., Conti G., De Amicis R. (2004). A SEMANTIC AWARE VR SYSTEM FOR ARCHITECTURE. IN III Congrès internacional arquitectura 3000 : l'arquitectura de la in-diferència : the architecture of in-difference : l'architecture de l'in-difference, Barcelona: ETSAB Escola Tècnica Superior d'Arquitectura de Barcelona UPC, 2004, p. 135-142.-(Khôra II).-ISBN: 9788460801429. Atti di: ARQUITECTURA 3000, Barcelona, 30th June-3 July 2004

  134. Riggio M., De Amicis R., Piazza M., (2004) VIRTUAL REALITY TECHNOLOGIES FOR RESTORATION OF ANCIENT BUILDINGS in III Congrès internacional arquitectura 3000 : l'arquitectura de la in-diferència : the architecture of in-difference : l'architecture de l'in-difference, Barcelona: ETSAB Escola Tècnica Superior d'Arquitectura de Barcelona UPC, 2004, p. 124-125.-(Khôra II).-ISBN: 9788460801429. Atti di: ARQUITECTURA 3000, Barcelona, 30th June-3 July 2004

  135. De Amicis R., Ucelli G., Hernàdvölgyi I.T. (2004). SHAPE KNOWLEDGE EMBEDDED WITHIN VIRTUAL REALITY ENVIRONMENTS. SIMAI VII: Applicazioni della Matematica all'Industria Culturale. September, 2004, Venice. Italy.

  136. De Amicis R., Conti G., Fiorentino M., Ucelli G., Faisstnauer C. (2004). SHAPE MODELLING IN A VIRTUAL REALITY WORKPLACE. SIMAI VII: Applicazioni della Matematica all'Industria Culturale. September, 2004, Venice. Italy.

  137. Conti G., De Amicis R., Ucelli G. (2004). A USER-FRIENDLY AUTHORING TOOL FOR MIXED REALITY APPLICATIONS. Convegno Nazionale XIV ADM – XXXIII AIAS. Bari 2004, August 31-September 2, 2004.

  138. De Amicis R., Ucelli G., Conti G. (2004). VIRTUAL REALITY TECHNOLOGY PLUS KNOWLEDGE MANAGEMENT FOR SUPPORTING THE STYLING PROCESS. In proceedings of FISITA 2004, World Automotive Congress. 23-27 May, Barcelona,Spain.

  139. De Amicis R., Conti G., Ucelli G. (2004). AN ADVANCED VIRTUAL REALITY MULTIMODAL INTERFACE FOR DESIGN. . In International design conference 8th; DESIGN 2004, Design Information Systems & Knowledge Management, pp. 717-722. Publisher Faculty of Mechanical Engineering and Naval Architecture, Zagreb. ISBN: 9536313618, 9536313596.

  140. Ucelli G., De Amicis R., Conti G. (2004). A VR/KM INTEGRATED PLATFORM FOR SUPPORTING INTEROPERABILITY IN CONCEPT DESIGN. In International design conference 8th; DESIGN 2004, Design Information Systems & Knowledge Management, pp. 931-936,. Publisher Faculty of Mechanical Engineering and Naval Architecture, Zagreb. ISBN: 9536313618, 9536313596.

  141. De Amicis R., Conti G., Fiorentino M. (2004). TANGIBLE INTERFACES IN VIRTUAL ENVIRONMENTS FOR INDUSTRIAL DESIGN. In Proceedings of AVI 2004-ADVANCED VISUAL INTERFACES International Working Conference in cooperation with ACM-SIGCHI, ACM-SIGMM-May 25-28, 2004, Gallipoli (Lecce), Italy. pp 261-264, ISBN:1-58113-867-9, doi>10.1145/989863.989908

  142. Caputo F., De Amicis R., Di Gironimo G., Stork A. (2003). ERGONOMIC DRIVEN DESIGN IN AUGMENTED REALITY. In selected papers on Tools and Methods Evolution in Automotive Design from XIII ADM-XV INGEGRAF International Conference, Napoli: ARPA, Università degli Studi di Napoli Federico II, 2003. ISBN: 88-900081-6-4 pp.83-93 a cura di F. Caputo, G. Monacelli e A. Soprano.

  143. Caputo F., De Amicis R., Di Gironimo G., Stork A. (2003). ERGONOMIC DRIVEN DESIGN IN AUGMENTED REALITY. XIII ADM-XV INGEGRAF, International Conference on Tools and Methods Evolution in Engineering Design, June 4th and June 6th, 2003, Naples Italy. In Caputo, F.: Selected papers on Tools and Methods Evolution in Automotive Design from XIII ADM-XV INGEGRAF International Conference, Napoli: ARPA, Università degli studi di Napoli Federico II, 2003, ISBN: 88-900081-6-4, p.83-93

  144. Conti G., Ucelli G., De Amicis R. (2003). A MULTI-USER VIRTUAL REALITY DESIGN SYSTEM FOR CONCEPTUAL DESIGN. XIII ADM-XV INGEGRAF International Conference. International Conference on Tools and Methods Evolution in Engineering Design, June 4th and June 6th, 2003. In Proceedings Associazione Nazionale Disegno di Macchine -ADM-: International Conference on Tools and Methods Evolution in Engineering Design 2003. CD-ROM, Napoli: ARPA, Università degli studi di Napoli Federico II, 2003,6 S

  145. Ucelli G., De Amicis R., Conti G., Giunchiglia F., Noll S. (2003). A SEMANTIC-BASED INFORMATION MANAGEMENT SYSTEM TO SUPPORT INNOVATIVE PRODUCT DESIGN. Workshop AICA 2003. (vol. 1, pp. 77-85). September, 2003, Trento, Italy

  146. De Amicis R., Fiorentino M., Stork A., Monno G. (2003). 3D-TAPE DRAWING IN VIRTUAL AND AUGMENTED REALITY. XIII ADM-XV INGEGRAF International Conference. International Conference on Tools and Methods Evolution in Engineering Design, June 4th and June 6th, 2003. In Proceedings Associazione Nazionale Disegno di Macchine -ADM-: International Conference on Tools and Methods Evolution in Engineering Design 2003. CD-ROM, Napoli: ARPA, Università degli studi di Napoli Federico II, 2003,6 S.

  147. Conti G., Ucelli, U. De Amicis, R. (2003). JCAD-VR – A MULTI-USER VIRTUAL REALITY DESIGN SYSTEM FOR CONCEPTUAL DESIGN. Selected Readings in Computer Graphics 2003, Fraunhofer IRB Verlag, Stuttgart, pp. 299-307. ISSN 0948-3950 ISBN 3-8167-6608-0.

  148. Fiorentino M., De Amicis R., Stork A., Monno G. (2002) SPACEDESIGN: A MIXED REALITY WORKSPACE FOR AESTHETIC INDUSTRIAL DESIGN. In Jacobs, A.; Müller, S.; Stricker, D.; Schmalstieg, D. ; EUROGRAPHICS IEEE and ACM International Symposium on Mixed and Augmented Reality 2002. Proceedings : ISMAR 2002 ; september 30-october 1, 2002 ; Darmstadt, Germany, Los Alamitos, Calif.: IEEE Computer Society, 2002, ISBN: 0-7695-1781-1, pp.86-94 DOI: 10.1109/ISMAR.2002.1115077

  149. Fiorentino M., De Amicis R., Stork A., Monno G. (2002). SURFACE DESIGN IN VIRTUAL REALITY AS INDUSTRIAL APPLICATION. DS 30: Proceedings of DESIGN 2002, the 7th International Design Conference, Dubrovnik, 2002, pp 477-482, ISBN 953-6313-45-

  150. De Amicis R., Bruno F., Stork A., Luchi M.L. (2002). THE ERASER PEN: A NEW INTERACTION PARADIGM FOR CURVE SKETCHING IN 3D. In: Marjanovic, D.: 7th International Design Conference 2002. Proceedings : May 14-17, 2002, Cavtat, Dubrovnik, Croatia Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, 2002, ISBN: 953-6313-45-6, pp.465-470

  151. Stork A., Bimber O., De Amicis R (2002). PROJECTION-BASED AUGMENTED REALITY IN ENGINEERING APPLICATIONS. Computer Aided Design. CAD’02, pp. 241-248,. In: Stelzer, Ralph H. (Ed.) u.a.; Gesellschaft für Informatik (GI), Group 4.2.1 Computer Aided Design (CAD) u.a.:CAD 2002. Proceedings : Corporate Engineering Research. Bonn: GI, 2002, ISBN 3-86005-298-5 S.241-248.

  152. De Amicis R., Fiorentino M., Santos P., Stork A. (2002). SKETCHAR-SKETCHING IN MIXED REALITIES. Augmented Reality Workshop. In Gausemeier, J. ; Heinz-Nixdorf-Institut -HNI-, Paderborn: Augmented und Virtual Reality in der Produktentstehung, Paderborn: HNI, 2002 (HNI-Verlagsschriftenreihe 107) ISBN: 3-935433-16-6, pp 145-156

  153. Fiorentino M., De Amicis R., De Amicis R., Monno G. (2002). SPACEDESIGN: CONCEPTUAL STYLING AND DESIGN REVIEW IN AUGMENTED REALITY. EUROGRAPHICS Italian Chapter. 11 -12 July 2002, Politecnico di Milano-Bovisa, Italy, pp 86-94.

  154. De Amicis R., Fiorentino M., Stork A. (2001). PARAMETRIC INTERACTION FOR CAD APPLICATION IN VIRTUAL REALITY ENVIRONMENT. XII ADM International Conference,. (pp. D3/43-D3/52). Design Tools and Methods in Industrial Engineering, 4-7 Sep. 2001, Rimini , Italy.

  155. Stork, A. , Schimpke, O., De Amicis, R. (2000) SKETCHING FREE-FORMS IN SEMI-IMMERSIVE VIRTUAL ENVIRONMENTS, in Proceedings of the American Society of Mechanical Engineers, Design engineering technical conferences ; 1 ; 729-736, Computers and information in engineering conference 20th, Computers , and information in engineering conference; 2000; Baltimore, MD, , ASME ; 2000

  156. De Amicis R., Stork A., (2000). ARCADE/VT-A VIRTUAL TABLE-CENTRIC MODELING SYSTEM. Rössler, A.; Cruz-Neira, C.; Riedel, O. ; Virtual Reality Applications Center: Fourth International Immersive Projection Technology Workshop 2000. Proceedings. CD-ROM : June 19-20, 2000, Iowa State University, Ames, Iowa, USA

  157. De Amicis R., Brunetti G., Rix J. (1999). VIRTUAL ENGINEERING AND USING VIRTUAL REALITY FOR ENGINEERING. In Associazione Nazionale Disegno di Macchine -ADM-: International Conference on Design Tools and Methods in Industrial Engineering. Session Poster. 11th ADM Conference Proceedings, Palermo, 1999, p.153-161, Selected Readings in Computer Graphics 2000, Fraunhofer IRB Verlag, Stuttgart, pp. 347. 356. ISSN 0948-3950 ISBN 3-8167-6356-1.

  • linkedin

<my first name>.de.amicis at gmail.com

+1 (541) 737-0741

+1 (541) 737-1300

Corvallis, OR, USA

©2017 BY RAFFAELE DE AMICIS

bottom of page